| Bore / Inner Diameter MM | 70.0 |
|---|
| Bolt Center to Center MM | 260.0 |
|---|
| Base to Center Height MM | 315.0 |
|---|
| Width MM | 120.0 |
|---|
| Housing Width MM | 90.0 |
|---|
| Height MM | 95.0 |
|---|
| Dynamic Load Capacity N | 0.175 |
|---|
| Seal Type | TSNA-G Seal - Split Rubber|TS-Seal - Aluminum with O-Ring (Optional)|U-Seal - Split Rubber Steel Reinforced (Optional)|TSNC - Split Steel and Felt Seal (Optional)|TAU - Taconite Seal (Optional) |
|---|
| Adapter | H216|H316 |
|---|
| Bolt | M20 |
|---|
| Ball Bearing Part Number | 1216 K|2216 K |
|---|
| End Cover | EC 516A |
|---|
| Housing | SNG 516-613 |
|---|
| Material | Cast Iron|Ductile (Optional) |
|---|
| Rings | FR140/16|FR140/12.5 |
|---|
| Seals | TSNA516G,TAU516,TSNC516,U516TS,U516 |
|---|
| Series | SNG 500 Series Plummer Block Housings |
|---|
| Spherical Bearing Part Number | 222216 K |
|---|
| Features | - Adapter Mounted Ball or Spherical Bearing
- End Covers and Taconite Seals Available
- Interchanges with PTI’s SNHF type
- 4-Bolt Base optional
|
|---|
| Notes | - Industry Standard Metric Block Dimensions Interchangeable with Competitive Units
- SNG 500 Series Housing can be used as SNG 200 Housing by using felt seals
- Bearing Part Number in bold face is a double row spherical and most popular. Typical suffix to the bearing part number is C3W33 where C3 is the internal clearance and W33 indicates a lube groove on the bearing Outer Diameter K indicates taper bore bearing. For example specify 22220 K C3W33. Other clearances available upon request.
|
|---|
